Customer Support



      I-7530-G CR

      Product description

      Download Datasheet Download PDF

      Converter/RS-232 to CAN/isolated

      • Compatible with CAN specification 2.0A and B
      • Fully compatible with ISO 11898-2 standard
      • Support various baud rate from 10K bps to 1M bps
      • Jumper for 120 Ω terminator resistor
      • Software configurable CAN and RS-232
      • communication parameters
      • 1000 frames in CAN received buffer, 900 frames in
      • RS-232 received buffer
      • Watchdog inside
      • Support transparent communication mode

      CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The following figure shows the application architecture for I-7530/I-7530T/I-7530FT modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7530/I-7530T/I-7530FT Converters. The programmable RS-232 device (For example: I-8411/I-8431/I-8811/I-8831/W-8031/W-8331/W-8731 embedded controller) can use the serial port to connect to the CAN network via the I-7530/I-7530T/I-7530FT modules. In order to use the CAN network with traditional RS-232 devices, we provide a way to achieve this purpose. The I-7530/I-7530T/I-7530FT are designed to unleash the power of CAN bus via RS-232 communication method. It accurately converts messages between CAN and RS-232 networks. This module let you to communicate with CAN devices easily from any PC or devices with RS-232 interface.


      Article number
      I-7530-G CR
      I-7530-G CR
      € 142,17
      € 119,71
      Excl. tax
      I-7530-G CR
      I-7530-G CR
      2-3 weeks
      Add to cart

      Recently viewed

      Compare 0

      Add another product (max. 5)

      Start comparison

      Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »