Customer Support
0
Close

Categories

Filters

    I-7565-G CR

    € 133,83
    € 115,09 Excl. tax We dispatch within : 2-3 weeks
    Converter/USB to CAN... Show more
    • Your reliable partner since 21 years
    • Shipping from our own warehouse !
    • Secure shipping in EU with DPD Traceable
    • Questions : Call +31-(0)85-065 6325

    Product description

    Download Datasheet Download PDF

    Converter/USB to CAN

     
    • RoHs Design
    • Fully compliant with USB 1.1/2.0(Full Speed)
    • Fully compatible with the ISO 11898-2 standard
    • No external power supply is required as I-7565 takes it's power from the USB bus
    • 82C250 CAN transceiver
    • Transmission speed up to 1M bps for CAN and 921.6K bps for USB
    • Support both CAN 2.0A and CAN 2.0B
    • Built-in jumper to select 120 ohm terminal resister
    • Power, data flow and error indicator for CAN and USB
    • 1000 frames in CAN received buffer
    • Watchdog inside
    • Windows 98/ME/2000/XP/Linux drivers support
    • Linux driver supported‥
    • Support of OPC serve
    • Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7565.

    CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface. Nowadays the interface is present in every new PC and is supported by the MS-Windows 98, Me, 2000 and XP operating systems. If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).

    The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface. 3000V isolation on CAN side

    The CAN port of I-7565 is an isolated with 3000V isolation. This isolation can protect the local devices from the damage signal coming from CAN network.
    Watchdog inside
    The I-7565 Watchdog is a hardware reset circuit to monitor the I-7565’s operation status. When working in harsh or noisy environment, the I-7565 may be down by the external signal. The circuit may let the I-7565 to work continuously and never halt.
    Power and Error indicator display
    There are two indicators on the I-7565.The power indicator can help user to check whether the I-7565 is standby or transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7565. 

    Specifications

    Article number
    I-7565-G CR
    SKU
    I-7565-G CR
    I-7565-G CR
    € 133,83
    € 115,09
    Excl. tax
    I-7565-G CR
    I-7565-G CR
    We dispatch within : 2-3 weeks
    Add to cart

    Recently viewed

    Compare 0

    Add another product (max. 5)

    Start comparison

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »