Klantenservice
0
Sluiten

Categorieën

Filters

      ECAT-2094S CR

      € 578,67
      € 487,24 Excl. btw levertijd: 2-3 weken
      Stepper Motor Controller/EtherCAT/4Axis/8DI/2DO... Toon meer
      • Reliable Partner ! Already 20 years at your service
      • Shipping from our own warehouse in The Netherlands
      • Secure shipping in EU with DHL Europlus
      • Questions : Call +31-(0)85-065 6325

      Productomschrijving

      Download Datasheet Download PDF

      Stepper Motor Controller/EtherCAT/4Axis/8DI/2DO

       
      • Supports four stepper motors (2-phase bipolar)
      • Stepper motors are controlled in an open loop operation
      • Programmable coil current level: up to 1.5 A
      • Programmable microstep size: maximum 256 microsteps per full step
      • Supported motor voltage range: 5 to 46VDC
      • 4 x Encoder interfaces (A, B, Z), differential
      • 8 x Digital input. Two DI channels for each axis: reference switch input, latch input
      • 2 x Digital output

      The ECAT-2094S stepper motor controller is a cost-effective, two-phase bipolar stepper driver. The ECAT-2094S simultaneously controls up to four stepper motors. A motor voltage range between 5 and 46V DC and a maximum motor coil current of 1.5A is being supported. For each motor the maximum running coil current, microstep resolution and other motion parameters are software selectable.

      The ECAT-2094S is a standard EtherCAT slave and an EtherCAT master is required to operate the device. The ECAT-2094S supports three operation modes: Free-Run, SM-Synchron and Distributed Clock (DC).

      Two-phase bipolar stepper motors can be directly connected to the ECAT-2094S device. The device is designed to operate the stepper motor in an open loop. Configuration has to be done by the EtherCAT master and the application program. Each stepper motor is being independently controlled by a separated driver IC. The four driver ICs are not synchronized and work independently from each other. The driver automatically controls the torque and position of the motor. An integrated ramp generator automatically calculates the acceleration and deceleration distance. In position mode the controller drives the motor to the target position and in velocity mode accelerates the motor to the target velocity. All motion parameters can be changed on the fly.

      The ECAT-2094s has four integrated incremental encoder interfaces. Four 32 bit high frequency encoder counter counts the input signal of external  incremental  encoders.  The  encoder  can  for example be used for  homing  purposes  and  for consistency checks.

      High resolution of up to 256 microsteps per full step is supported for a ensuring smooth and precise motor operation.
      For each motor two digital input channels are provided. The digital inputs can be set to act as a simple DI, as a left and right hardware limit switch which automatically stops the motor when activated, or a latch trigger for latching the current motor and encoder position.  

      The module must be supplied by three power sources. Two motor supply and a 24Vdc control supply. Two motors share one power supply.

      Specificaties

      Artikelnummer
      ECAT-2094S CR
      SKU
      ECAT-2094S CR
      ECAT-2094S CR
      € 578,67
      € 487,24
      Excl. btw
      ECAT-2094S CR
      ECAT-2094S CR
      levertijd: 2-3 weken
      In winkelwagen

      Recent bekeken

      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Wij slaan cookies op om onze website te verbeteren. Is dat akkoord? JaNeeMeer over cookies »