I-7531-G CR


      Download Datasheet Download PDF


      • 2 CAN channels
      • Compatible with CAN 2.0A/2.0B/ISO 11898-2 standards
      • Max baudrate : 800Kbps
      • Automatic baudrate detection
      • 2500 VRMS photo coupler isolation on the CAN side
      • 3KV galvanic isolation among the power supply and 2 CAN ports
      • up to 100 nodes on each CAN port
      • DIN-rail mountable

      The I-7531 is an isolated CAN repeater that can be used to establish a physical coupling of two segments of a CAN bus system. This module is designed to isolate the noise and disturbance between the two CAN ports of the I-7531. When the CAN signal is decayed because of the rough bus cable or noise, the I-7531 can recover the shape of the CAN signals to the original ones. Tree topologies can be implemented as well as long drop lines using the I-7531. In order to use the I-7531 easily, the module can automatically adjust the baud rate by itself to match the CAN network. Users just connect the I-7531 with the CAN buses, check the terminator resistor and power it on, subsequently the I-7531 enable to work normally.
      For detail information , please refer to the user manual of I-7531.


      I-7531-G CR
      I-7531-G CR
      € 116,33
      € 97,95
      Excl. btw
      I-7531-G CR
      I-7531-G CR
      2-3 weken
      In winkelwagen

      Recent bekeken

      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Wij slaan cookies op om onze website te verbeteren. Is dat akkoord? JaNeeMeer over cookies »