tM-SG4 CR

    € 26,83
    € 23,07 Excl. btw levertijd: 2-3 weken
    Pull-high/Pull-low Module/RS-485... Toon meer
    • Reliable Partner ! Already 20 years at your service
    • Shipping from our own warehouse in The Netherlands
    • Secure shipping in EU with DHL Europlus
    • Questions : Call +31-(0)85-065 6325


    Download Datasheet Download PDF

    Pull-high/Pull-low Module/RS-485

    • Switch-selectable Pull-high/Pull-low Resistors
    • 15-step Switch-selectable Termination Resistor
    • LED Indicator for Power/Termination
    • DIN-Rail mountable
    • Cost-effective
    • Wide Operating Temperature Range: -25 °C ~ +75 °C

    The tM-SG4 is an optional module that is used to improve the communication of RS-485 network. It provides switch selectable pull-high and pull-low resistors on RS-485 network. It also has 15-step switch selectable termination resistor such that the user can select a proper termination resistor to be connected to the RS-485 network easily. If the RS-485 network is not over 100 meters, the termination resistors are not needed. Otherwise, it may be necessary to insert two termination resistors at both end of the RS-485 network. It is not easy to calculate the value of a termination resistor on the RS-485 network. The best way to do this is to use an oscilloscope to check the RS-485 signal directly. If the impedance match of RS-485 network is OK, the oscilloscope will show a very nice square wave. If these square wave signals are distorted, the user will need to insert two termination resistors at both end of the RS-485 network.


    tM-SG4 CR
    tM-SG4 CR
    tM-SG4 CR
    € 26,83
    € 23,07
    Excl. btw
    tM-SG4 CR
    tM-SG4 CR
    levertijd: 2-3 weken
    In winkelwagen

    Recent bekeken

    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Wij slaan cookies op om onze website te verbeteren. Is dat akkoord? JaNeeMeer over cookies »