Customer Support



    HNS-45-D2 Inclination switch with 4x PNP output

    €288,-Excl. tax We dispatch within : 3 weeks
    Inclination switch ±45° with 4x PNP output... Show more
    • B2B Industrial Supplier since 1999
    • Shipping from our own warehouse in NL !
    • Shipping in EU with DPD Traceable
    • Reliable SSL & Secure Payments

    Product description

    Download Datasheet Download PDF

    Very precise and robust inclination switch with 4 PNP transistor switching outputs for monitoring 2 axes

    • 4x PNP transistor switching outputs
    • Very precise: MEMS sensor element
    • Robust metal housing IP67
    • Small dimensions

    Easy programmable by "teaching" via DIP switch

    The HNS-45-D monitors the inclination of 2 axes, X and Y.
    The switching angle can be defined independently for both axes.
    The switching angles are automatically mirrored on the respective axis and thus monitor the inclination both in plus and minus direction.

    Subsequent adjustment of the zero position

    The zero position can be changed subsequently without having to reprogram the switching angles.

    Output current:max. 500 mA per output
    Protection class:IP67
    Material (housing):Aluminum die-cast
    Electrical connection:M12 8-pole
    Operating voltage:9...30 VDC
    Current consumption:< 30 mA
    Output voltage:approx. Ub -1,5 V
    Variant:X-Axis (2xOUT), X/Y-Axis (4xOUT)
    Output signal:4x PNP
    Switching angle X-Axis:0,5°...45°
    Switching angle Y-Axis:0,5°...45°
    Hysteresis mode:0,1°…2° with potentiometer
    Output function:NO, NC
    Inertia (cutt-off frequency):5...0,2 sec. (0,2...5 Hz)
    Accuracy:±0,05° + 1% of the switching angle
    Resolution sensor:0,025°
    Calibration precision:± 0,05°
    Operating temperature:Operation -25°...+80°C


    More Information about inclination switches and inclination sensors
    Inclination switches may be installed in stationary or mobile applications, in which it is necessary to measure and safely supervise any kind of an angle. The moment a preset angle has been reached, the respective switching output will open or close. Typical cases of application of inclination switches (which are often also called crash sensors due to their case of operation) are tilt protection devices, lifting platforms, forklifts, cranes, excavators, agricultural machinery, truck trailers and also a lot of electric car charging stations. But inclinations switches are also required and very useful in many more different areas such as mobile homes, yachts, off-road vehicles or wind power plants.

    Inclination Switches / Inclination Sensors available from PIMZOS.COM
    The electronic inclination switches, also called inclinometers, are equipped with either transistor outputs or relay outputs. They are designed for professional continuous operation and excel by highest quality and accuracy as well as through a robust, compact and an easy-to-assemble design. The sensor element and the electronics are protected against environmental influences excellently by a durable metal housing and the potting compound. All our inclination switches work without mercury and are temperature compensated. Angles are measured contactless by a modern, highly accurate Micro Electromechanical System (MEMS) with intelligent evaluation by a micro controller.


    Article number
    50200007 - HNS-45-D2
    50200007 - HNS-45-D2

    Related Products

    Check It ! Maybe you need this too ...

    M12-cable (HNS,DNS)
    M12-cable (HNS,DNS)
    € 35,40Excl. tax
    HNS-45-D2 Inclination switch with 4x PNP output
    € 288,-
    Excl. tax
    HNS-45-D2 Inclination switch with 4x PNP output
    50200007 - HNS-45-D2
    We dispatch within : 3 weeks
    Add to cart

    Recently viewed

    Compare 0

    Add another product (max. 5)

    Start comparison

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »