- Reliable Partner ! Already 20 years at your service
- Shipping from our own warehouse in The Netherlands
- Secure shipping in EU with DHL Europlus
- Questions : Call +31-(0)85-065 6325
Complete your purchase
WiFi IoT Cloud datalogger, for measuring temperature, humidity, light and vibration.
What is it?
This datalogger runs on batteries (2x AA) and is connected to your own WiFi network.
It measures : 1) Temperature, 2) Humidity, 3) Ambient Light (Lux) and 4) Vibration (G).
This information is stored in the internal memory (300.000
The information is transmitted via WiFi to the UbiBot Cloud platform.
You can view your data online worldwide via PC, Phone, Tablet, etc.
You can set alarms if the measurements have a low/hight value and you get real-time notifications.
This box is not waterproof and must remain dry. We have waterproof pouches for wet use.
1 external sensor can be connected (sold separately)
The Cloud is free (200Mb) enough for 2 years of data at default settings.
The UbiBot WS1 is an all-in-one IoT sensor built with industrial grade components. The WS1 measures temperature, humidity, ambient light, vibration. The WS1 allows you to wirelessly monitor your environment in real-time and gives you remote access to your data. All the data is automatically synchronised to Ubibots big data platform via WiFi.
UBIBOT cloud-based IoT platform offers advanced data analysis and management. Configure all of your devices in one Ubibot account by using the Ubibot App. It also allows you to setup real-time notifications - if a metric goes outside the range you specify, the platform will notify you through the app, by email or other methods, allowing you to respond promptly before costly damage happens. The IoT platform gives users access to both the real-time data and history via our mobile app or on any browser. We are now working with IFTTT (if this then that), allowing you to build custom link with other smart devices.
Switch the temp unit °F/°C and user calibration is available. The device can store over 300,000 records in its internal memory, which can protect your data against network failure. Even if the network fails, the UbiBot WS1 still stores readings, thus ensuring there are no gaps in the data history.
The data sync interval can be set by you. This allows you to balance battery life against frequency of data capture. With the default data sync interval of 15 minutes the device has a battery life of up to 4- 6 months using 2 AA alkaline batteries. Power-supply using Micro-USB is supported. You can check the battery voltage of the device remotely and set up rules to be notified when low-battery, network failure or sensor reading exceeds the setting range. Available rule alerts include Email, APP, SMS, Phone Call, HTTP API. Please note, charges may apply to SMS text and voice call alert modes. These two modes cost the balance of the credits in your account.
No subscription is needed. Free 200MB Cloud Storage enough to store data over 2 years on default settings. Export the data to CSV or PDF without extra charge.
Physical Specifications :
Weight : 31.8g ± 3g
Dimensions : 6.5 x 6.5 x 1.7 cm
Colour : White
Material : flame resistant ABS+PC
Switch Type : button
Power Source : 2 x AA batteries /Micro USB 5V/2A. (not included)
Technical Specifications :
Temperature : -20°C to 60°C
Humidity : 10% to 90%, No condensation
Light : 0-83k lux
Accuracy : Temperature ±0.3°C, humidity ±3%, ambient light ±2%
Data communications : WiFi
WiFi : 2.4GHz, channels 1-13 (5GHz WiFi NOT supported)
WiFi encryption mode : WPA/WPA2, WEP, or OPEN security protocols supported. WPA2-Enterprise (802.1x/RADIUS authentication) and WPA3 network is not supported.
Certification : CE, RoHS, FCC, RCM, IC certificates
Memory : 300,000 sensor records
External Probe : Supports DS18B20 probe (optional extra)
Scope of Suply (What is in the box)
1 x WS1 device
1 x manual book
1 x USB cable
2 x pieces of double side adhesive tape