Excelog One - Miniatuur handheld thermokoppel datalogger en simulator
USB to UART Converter, Bus Powered, Type A Connector, 5 ft [1.5 m] Long , 7 Pin Nano Mating Connector , Anodized Aluminum Shell , 30 AWG 7 Conductor Cable with Polyurethane Jacket , RoHS
PyroMiniUSB - PMUXCF, Close Focus optics - (3.5 mm @ 50 mm)
USB Infraroodtemperatuursensor voor Benchtop, Laboratorium en Onderwijs
LSB352 - Tension & Compression Load Cell , Rated Output (3 mV/V, 350 ohm) , Material - 17-4 PH S.S. , 1/2-20-Thread , Overload Protection , 4 Pin Lemo Receptacle, EGG.0B.304.CLL
Cable Assembly , 6 inch Long , 8 Position JST 08SR-3S Both Ends , 30 Awg Black Wires , Mates to LSM305
Black Mounting Base , To be mounted w/ TRS605
LLB550 Load Button Load Cell , RoHS Compliant, Bottom #6-32 Tapped Holes , Material - 17-4 PH S.S. , 4 Pin Micro Receptacle
LLB400 Load Button Load Cell , RoHS Compliant , #6-32 Bottom Tapped Holes , Material - 17-4 PH S.S. , 4 Pin Micro Receptacle
Flex Cable Breakout Board , 4 Pin/Conductor, 0.5 mm Pitch , FFC/FPC Connector to Thru-Hole / Pin Headers
TFF600, 2000 in-lb, Reaction Torque Sensor, RoHS Compliant, Material - 2024-T4, 1 1/2" [38.1 mm] ID, 6 Pin Bendix Receptacle, PT02A-10-6P
Quido ETH 60/3 includes 60 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two sta
Quido ETH 100/3 includes 100 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two s
Thermometer for Quido - Silicone. Length: depends on version Temperature ranges: -55 through +125 °C
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 8/8. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 8/8. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Metal box for Quido I/O module. The top and bottom of the box are included with a suitable fitting. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included in order to mount the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Straight Patch cable for computer network. Cable length 1m. Suitable for connecting any Ethernet device to a hub or switch. Cat5e, shielded, grey. (Photo illustration.)
