TDF650 , 12000 in-lb , Square Drive to Flange Reaction Torque Sensor , 1" Male Square Drive , RoHS Compliant , Material - 17-4 PH S.S., 6 Pin Bendix Receptacle , PT02A-10-6P
NIST Traceable Torque Calibration w/ Certificate, Clockwise & Counter Clockwise, 5 points
Communicatie Kit voor NanoTemp125 datalogger, voor gebruik met IFC400/IFC406
Upgrade your DAQ Factory License ! Choose you upgrade below.
Wall holder 90° for TQS4 O. With this holder you can place the sensor further from the wall.
The sensor is not included in the delivery.
Paneel meter voor loadcell met 4 en 6 draden, 96 x 48 mm (1/8 DIN, 6- digits, 14 mm LED hoogte, Voeding 24DC
Omvormer voor AC/DC-signalen. Uitgangssignaal in 4/20mA en 0/10Vdc. 3-eg geïsoleerd
LSB352 - Tension & Compression Load Cell , Rated Output (3 mV/V, 350 ohm) , Material - 17-4 PH S.S. , 1/2-20-Thread , Overload Protection , 4 Pin Lemo Receptacle, EGG.0B.304.CLL
ZCC211 , 15 ft Long , 11 Pin Nano to Cable Assembly , IP67, Material - PVC, 32 Awg 11 Conductors , Braided Shielded
LMD300 , 50 lb , Pinch Sensor with TEDS IEEE1451.4 and PT1000 RTD , RoHS Compliant , Material - 2024-T4 , 11 Position Circular Nano Connector
TCP2RTU-POE - MODBUS TCP naar RTU / ASCII-converter met PoE-voeding
TFF600, 2000 in-lb, Reaction Torque Sensor, RoHS Compliant, Material - 2024-T4, 1 1/2" [38.1 mm] ID, 6 Pin Bendix Receptacle, PT02A-10-6P
ZCC963 , 15 ft Long , DB9 Female to Cable Assembly , CC15 , Material - Polyurethane , 28 Awg 6 Conductors , Braided Shielded , For TFF500
TFF350, Reaction Torque Sensor, RoHS Compliant, Material - 2024-T4, 0.58" [14.7 mm] ID, 29 Awg 4 Conductor Spiral Teflon Cable, 6 in Long
Quido ETH 2/16 includes 2 digitl inputs, 16 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two stat
Thermometer for Quido - Silicone. Length: depends on version Temperature ranges: -55 through +125 °C
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
