LabJack Data Acquisition Systems | DAQ Systems Analog & Digital IO

LabJack T7-Pro

High Perforemance Multifunction DAQ with, Ethernet, and USB, 16-bit ADC, 100kS/s, Plus 802.11b/g WiFi & 24-bit ADC

Vergelijk

€ 850,-

€ 765,- Excl. btw

Bekijken

LabJack T7

High Performance Multifunction DAQ with, Ethernet, and USB, 16-bit ADC, 100kS/s.

Vergelijk

€ 570,-

€ 513,- Excl. btw

Bekijken

LabJack U3-LV-OEM

U3-LV-OEM. (PCB only!)

Vergelijk

€ 135,-

€ 121,50 Excl. btw

Bekijken

LabJack U3-HV

LabJack U3-HV. USB based multifunction data acquisition and control device, with 16 Flexible IO.

Vergelijk

€ 160,-

€ 144,- Excl. btw

Bekijken

LabJack T8

LabJack T8 - The new flagship DAQ from LabJack USA

Vergelijk

€ 1.400,-

€ 1.260,- Excl. btw

Bekijken

CB37

Provides convenient screw terminals for the DB37 connector on the LabJacks. Includes a screwdriver. Is compatible with LJTick signal-conditioning modules.

Vergelijk

€ 58,-

€ 52,20 Excl. btw

Bekijken

LJTick-InAmp3

Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples.

Vergelijk

€ 75,-

€ 67,50 Excl. btw

Bekijken

LabJack U6

Labjack U6, 16+ bits of resolution, Wide input range, Amazing price performace ratio

Vergelijk

€ 445,-

€ 400,50 Excl. btw

Bekijken

LabJack T4

USB of Ethernet multifunctioneel DAQ-apparaat met maximaal 12 analoge ingangen of 16 digitale I / O, 2 analoge uitgangen (10-bit) en meerdere digitale tellers / timers

Vergelijk

€ 305,-

€ 274,50 Excl. btw

Bekijken

LabJack U12-PH-OEM

OEM board-only version of the LabJack U12

Vergelijk

€ 225,-

€ 202,50 Excl. btw

Bekijken

LabJack T4-OEM

T4 OEM from Labjack. OEM Version, PCB Only

Vergelijk

€ 220,-

€ 198,- Excl. btw

Bekijken

TKAD DIN Rail Mounting Clip

The TKAD DIN rail mounting clip is used for mounting a LabJack device to a DIN rail.

Vergelijk

€ 6,-

€ 5,40 Excl. btw

Bekijken

LM34CAZ Silicon Temperature Sensor

The LM34CAZ is the most accurate version of the LM34 precision temperature sensor made by Texas Instruments. It has a very convenient output of 10mV per °F, so 0.78V would correspond to 78°F.

Vergelijk

€ 13,-

€ 11,70 Excl. btw

Bekijken

The PS12DC is a power switching board designed for medium to low current DC power switching applications. Controlled through 12 digital outputs, the board can switch power sources ranging from 5 to 28V DC. Attach the PS12DC to the DB15 connector pr...

Vergelijk

€ 119,-

€ 107,10 Excl. btw

Bekijken

LJTick-Proto

The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on newer LabJacks such as the U3 and UE9. Includes 3 loose p...

Vergelijk

€ 12,-

€ 10,80 Excl. btw

Bekijken

LJTick-CurrentShunt

signal conditionning unit from 4-20 mA signals.

Vergelijk

€ 65,-

€ 58,50 Excl. btw

Bekijken

LabJack U3-LV

U3-LV (Low Voltage) 0-2.4v or 0-3.6volts

Vergelijk

€ 160,-

€ 144,- Excl. btw

Bekijken

LJTick-RelayDriver

The LJTick-RelayDriver allows 2 digital I/O lines on a U3, U6, or UE9 to each control a relay or other moderate load.

Vergelijk

€ 19,-

€ 17,10 Excl. btw

Bekijken

EI1034

Easy to use and very accurate temperature probe. Features a waterproof stainless-steel probe, a high-level linear output of 10 mV per degree F, a typical accuracy of ±0.4 °F (±0.22 °C) at room temperature, and a range of 0 to +300 °F (-17 to +150 °C,...

Vergelijk

€ 73,67

€ 66,30 Excl. btw

Bekijken

LJTick-DAC

Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block, and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with any UD family device (U3/U6/UE9), except for U3 hardware ...

Vergelijk

€ 95,-

€ 85,50 Excl. btw

Bekijken

LJTick-DigitalOut5V

Converts 3.3V digital outputs to 5V digital outputs. Easily control 5V relays, or interface with a 5V logic device.

Vergelijk

€ 26,-

€ 23,40 Excl. btw

Bekijken

LJTick-VRef-41

Voltage reference accessory that outputs a stable 4.096V. Commonly used as an excitation voltage for bridge circuits. Simply attach the supply side of the bridge to the 4.096 terminal, and ground to the GND terminal. The IOA and IOB lines are simply...

Vergelijk

€ 40,-

€ 36,- Excl. btw

Bekijken

LJTick-OutBuff

Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accesso...

Vergelijk

€ 25,-

€ 22,50 Excl. btw

Bekijken

LabJack T7-Pro-OEM

T7-Pro-OEM from LabJack. OEM Version, PCB Only

Vergelijk

€ 790,-

€ 711,- Excl. btw

Bekijken

Aanbiedingen

PIMZOS

FEMA

FUTEK

LABJACK

PAPOUCH

MADGETECH

AVIOSYS

CALEX

SENECA

ExpertDAQ

ICPDAS

MP-SENSOR

MEER...

Inloggen

LabJack

Filter

Sorteer

Erkend distributeur voor :

Communicatie Protocol

Prijs

LabJack Corporation. - USA