Klantenservice
0
Sluiten

Categorieën

Filters

    LabJack

    LabJack Corporation. - USA Data Acquisition Systems | LabJack DAQ Systems Analog & Digital I/O Superior Data Acquisition Systems to collect analog & digital sensors. Log, automate and test. Use software like LabVIEW, MatLAB, Python, C, C++, DAQFactory Toon meer

    Erkend distributeur voor :

    Communicatie Protocol

    Prijs

    -
    43 Producten
    U6-PRO-OEM

    U6-PRO-OEM

    PCB Board OEM version of Labjack U6-PRO, 24 bit sigma-delta AD, Wide input range, Amazing price performace ratio

    € 405,- Excl. btw
    Bekijken
    U6-OEM

    U6-OEM

    PCB Board OEM version of Labjack U6, 16+ bits of resolution, Wide input range, Amazing price performace ratio

    € 360,- Excl. btw
    Bekijken
    LJTick-Resistance

    LJTick-Resistance

    The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors.

    € 40,50 Excl. btw
    Bekijken
    LJTick-VRef-41

    LJTick-VRef-41

    Voltage reference accessory that outputs a stable 4.096V. Commonly used as an excitation voltage for bridge circuits. Simply attach the supply side of the bridge to the 4.096 terminal, and ground to the GND terminal. The IOA and IOB lines are simply...

    € 36,- Excl. btw
    Bekijken
    LabJack T7-OEM

    LabJack T7-OEM

    T7-OEM from LabJack.  OEM Version, PCB Only

    € 468,- Excl. btw
    Bekijken
    CB15

    CB15

    Provides convenient screw terminals for the DB15 connector on LabJacks. Includes a screwdriver.

    € 29,70 Excl. btw
    Bekijken
    LJTick-Divider

    LJTick-Divider

    Signal-conditioning module designed to divide 2 single-ended channels of higher voltage analog signals down to 0-2.5 volt signals.

    € 31,50 Excl. btw
    Bekijken
    LabJack U3-HV-OEM

    LabJack U3-HV-OEM

    U3-HV-OEM. (PCB only!)

    € 121,50 Excl. btw
    Bekijken
    LJTick-LVDigitalIO

    LJTick-LVDigitalIO

    A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply...

    € 22,50 Excl. btw
    Bekijken
    LM34CAZ Silicon Temperature Sensor

    LM34CAZ Silicon Temperature Sensor

    The LM34CAZ is the most accurate version of the LM34 precision temperature sensor made by Texas Instruments.  It has a very convenient output of 10mV per °F, so 0.78V would correspond to 78°F.

    € 11,70 Excl. btw
    Bekijken
    Mux80

    Mux80

    The Mux80 is an analog input expansion board that increases the number of analog inputs possible for a LabJack unit. It can be connected to a U6 or UE9 directly through the DB37 connector. Ten of the LabJack's analog inputs are multiplexed (1:8 each...

    € 166,50 Excl. btw
    Bekijken
    EI1022

    EI1022

    Easy to use and inexpensive temperature probe. Features a plastic probe, a high-level linear output of 10 mV per degree K, a typical accuracy of ±1°C (±1.8°F) at room temperature, and a range of -40 to +100 °C (-40 to +212 °F).

    € 37,80 Excl. btw
    Bekijken
    CB25

    CB25

    Provides screw terminal connections for the LabJack U12's 16 extra digital I/O. A screwdriver and DB25 cable are included. For the LabJack U12 only.

    € 48,60 Excl. btw
    Bekijken
    LJTick-Proto

    LJTick-Proto

    The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on newer LabJacks such as the U3 and UE9. Includes 3 loose p...

    € 12,60 Excl. btw
    Bekijken
    Mux80-OEM

    Mux80-OEM

    OEM Version of Mux80. (PCB Only!)

    € 157,50 Excl. btw
    Bekijken
    LJTick-OutBuff

    LJTick-OutBuff

    Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accesso...

    € 22,50 Excl. btw
    Bekijken
    LJTick-DAC

    LJTick-DAC

    Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block, and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with any UD family device (U3/U6/UE9), except for U3 hardware ...

    € 85,50 Excl. btw
    Bekijken
    LabJack U12-NTH-OEM

    LabJack U12-NTH-OEM

    OEM board-only version of the LabJack U12, NTH Version

    € 202,50 Excl. btw
    Bekijken
    LabJack T7-Pro-OEM

    LabJack T7-Pro-OEM

    T7-Pro-OEM from LabJack.  OEM Version, PCB Only

    € 711,- Excl. btw
    Bekijken

    LabJack Corporation. - USA

    Data Acquisition Systems | LabJack DAQ Systems Analog & Digital I/O

    Superior Data Acquisition Systems to collect analog & digital sensors. Log, automate and test. Use software like LabVIEW, MatLAB, Python, C, C++, DAQFactory

    Recent bekeken

    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Wij slaan cookies op om onze website te verbeteren. Is dat akkoord? JaNeeMeer over cookies »