
The RB12 Provides a convenient interface to industry standard I / O modules, allo wing electricians, engineers, and other Qualified Individuals, to interface a Labjack with high voltages / currents. Logic buffers are used to providence the 10-15 mA needed

voltage signal conditioning unit from 4-20 mA signals.

Labjack U6-PRO, 24-bit sigma-delta AD, Wide input range, Amazing price performace ratio

USB-based multifunction data acquisition and control. A breakthrough price / performance ratio. This is the original Labjack from Labjack Corporation USA!

MTA250 , Ch Fx: 10 lb; Ch Fy: 10 lb; Ch Fz: 10 lb , Inline 3 DOF/Axis Load Cell , 33.8 mm OD x 64.8 mm H , M4x0.7-Threads , RoHS Compliant , Material - 2024-T4 Aluminum , 3x 4 Pin Micro Receptacle

QIA128 is a miniature embedded sampling system for load cells with ultra low power consumption of only 60 mW. It is capable of sampling strain gauge signals up to 1300 samples per second (SPS) with up to 18.4 Bits of Noise Free Resolution (NFR).

ThermaLock thermowell for use with the HiTemp140-CF datalogger

The CF202 Canning Fitting securely attached MadgeTech HiTemp140-CF data logggers to jars, lids, cans and other containers for internal temperature monitoring for heat penetration tests and temperature distribution studies.

Temperature and Humidity Sensor with Display, Output 4-20mA

PIMZOS Loadcell Summing Box for 8 loadcells mV/V, IP65

LynxPro-RH - Bluetooth Temperature & Humidity Data Logger

ZCC211 , 15 ft Long , 11 Pin Nano to Cable Assembly , IP67, Material - PVC, 32 Awg 11 Conductors , Braided Shielded

Cable Assembly , 6 inch Long , 8 Position JST 08SR-3S Both Ends , 30 Awg Black Wires , Mates to LSM305

PIMZOS Pt100 - 3-Wire, Class A, Indoor Air Temperature Sensor, ABS Houing for Wall mounting, Range -40°C to +85°C, IP40

ZAC151 , LCB500 Tension Base Plate , Base Plate w/ Female Thread , Material - 17-4 PH S.S. , 1/2-20-Thread

LSB400 Tension & Compression Load Cell , Material - 17-4 PH S.S. , M16x2-Thread , 4 Pin Lemo Receptacle, EGG.0B.304.CLL

Power adapter that allows you to use USB port to power 5V device. Cable length: 1,8 m Jack connector 3.5 x 1.35 mm. Plus pole inside. Suitable example for TME, TH2E

TDF675, 24000 in-lb, Reaction Torque w/ Flange to Sq., RoHS Compliant, Material - 17-4 PH S.S., 1" Sq. Drive, 6 Pin Bendix Receptacle, PT02H-10-6P

USB520 , High Speed & Resolution External USB Output Kit , Up To 20.5 Bits Noise Free , Strain Gauge mV/V & Amplified +/-10 VDC/4-20 mA Inputs Up to 4800 SPS & Encoder TTL Inputs Up to 10 SPS , 35 mm DIN Clip , Powered Off Of USB 2.0 Only

Quido ETH 4/4 includes 4 digital inputs, 4 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two state

Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 10/1. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)

Metal box for Quido I/O module. The top and bottom of the box are included with a suitable fitting. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)

Plastic operating tool (lever) for WAGO 236 Cage Clamp terminal

Straight Patch cable for computer network. Cable length 1m. Suitable for connecting any Ethernet device to a hub or switch. Cat5e, shielded, grey. (Photo illustration.)
