Wiegand is a standard interface used in contactless card readers. Wie485 is bootable to convert the Wiegand interface to a format usable by a standard serial port (RS485).
The SW485 is a 9 channel RS485 Splitter / Hub / Repeater and connects 9 channels in STAR topology
IAA100, Full Bridge Strain Gage Signal Conditioning Voltage Amplifier, +/- 5 VDC +/- 10 VDC, 5 VDC Offset DIP Switch, Up to 25 kHz Bandwidth, Detachable Screw Terminal Connectors, Metallic Enclosure, integrated 35 mm DIN Clip
LCM100 , Sub-Miniature Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Lead Free, Material - 17-4 PH S.S. , M3x0.5-Thread , 34 Awg 4 Conductor Braided Cable , 5 ft Long
High Perforemance Multifunction DAQ with, Ethernet, and USB, 16-bit ADC, 100kS / s, plus 802.11b / g WiFi and 24-bit ADC
LabJakc U3-HV. USB based multifunction data acquisition and control device, with 16 Flexible IO.
150 ° C 3.6V Lithium Battery, ½ AA Pressure Contact
IHH505 Pro SensLog, Touchscreen handheld display and logger for mV/V, VDC, and mA measurements, with TEDS support and USB export for PC-based post-processing (SENSIT® 3.0+)
Panel meter for loadcell with 4 and 6 wires, 96 x 48 mm (1/8 DIN), 6- digits, 14 mm LED height, Power Supply 230VAC/50Hz
TCP2RTU is a transparent converter of the MODBUS TCP protocol running over Ethernet, into the MODBUS RTU protocol, running on RS485 lines.
Heat Penetration Testing System with HiTemp140-CF, CF202 and ThermaLock,
USB225 Pro / Elite, High Resolution USB Output Kit , Up to 20 Bits Noise Free Resolution or Up to 4,800 SPS , For Strain Gauge Full Bridge mV/V Inputs , Red Powder Coated Aluminum Enclosure
Pt100 - 3-Wire, Class A, Outdoor Temperature Sensor, ABS Houing for Wall mounting, Range -50°C to +90°C, IP67
PIMZOS Multiplexer 16 channels 0-4/20mA to RS485 Modbus
LSB200 , JR S-Beam Load Cell , RoHS Compliant , Material - 2024-T4 , M3x0.5-Thread , Overload Protection , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 5 ft Long
SNS-THE Temperature + Humidity Sensor
Intelligent Ethernet sensor for temperature, humidity and dew point
IDC150, Compact mV/V to SPI/UART Digital Signal Conditioner, Up To 1300 SPS or 18.4 Bits Noise Free Resolution , Terminal Block and JST Connectors
Isolator for Voltage AC/DC, mV to 1000V (TRMS), Analog Output ±10V or 4-20mA
TRS605, ±5VDC - Shaft-to-Shaft Rotary Torque Sensor + Encoder for RPM/Angle, Ranges selectable from 1 Nm to 1000 Nm
RTDTempX - RTD (Pt100) temperature data loggers. You can choose from 4 models with 4, 8, 12 and 16 channels
