100 Ω platinum RTD probe with clean-in-place (CIP) design and M12 connector.
Increases the output current of the DAC outputs on Labjack devices. Can also be used for switched 3.3V When attached to a 3.3V digital I / O line. Labjack devices can not output more than about 15mA On Their DAC0 DAC1 and analog outputs, so this acce...
The Motor101A is a data logging system to monitor the on/off status of motors. Includes declaration of conformance.
The ETR101A kit comes assembled and includes a data logger (TC101A-MP), temperature sensor (thermocouple type K), water resistant enclosure, interface cable (IFC200) hex screwdriver and software.
The RFPRHTemp2000A is a wireless pressure, humidity and temperature data logger. Includes standard calibration certificate.
Thermometer for thermocouples of type K with two inputs and Ethernet interface with PoE. The accuracy depends on the thermocouple. Measuring range -50 to +1350°C.
Serial line converter with TTL levels to the Ethernet. Allows you to easily connect a device with a serial interface to the network. GNOME232 TTL comes unboxed and is Particularly Suitable for installation in bestaande facilities.
Universal software for the majority of standard Papouch devices. It enable signals Central Monitoring and failure or data from our thermometers, hygrometers, A / D converters, I / O modules, etc. It is ook bootable to communicate using the MODBUS protocol
T7-Pro OEM from Labjack. OEM Version, PCB Only
The LF101A is a data logging system to measure and record leaf wetness. Includes declaration of conformance
One set of replacement O-rings for Level1000.
One set of replacement O-rings for Temp1000P
One set of replacement O-rings for Micro Temp.
The pHTemp2000 is a pH and temperature data logger. Includes standard calibration certificate.
The Level1000 is a water level and temperature data logger. Includes standard calibration certificate.
The State101A is a compact, state data logger. Includes declaration of conformance
The PRTemp1000D is a differential pressure and temperature data logger with NPT differential fitting. Includes ISO17025 accredited calibration certificate.
The PR2000 is a pressure data logger with NPT fitting and LCD for real-time monitoring. Includes ISO17025 accredited calibration certificate.
The MicroRHTemp is a miniature, humidity and temperature data logger. Includes ISO17025 accredited calibration certificate.
DAQFactory Lite (no media, downloaded product). Small system.
DAQFactory Runtime (no media, downloaded product). End user performance: Run your DAQFactory applications on multiple computers for less money.
The Mux80 is an analog input expansion board That Increases the number of analog inputs for a possible Labjack unit. It can be connected to a U6 UE9 directly or through the DB37 connector. Ten of the Labjack's analog inputs are multiplexed (1: 8 each ...
Mains Cable for use with IP Power, Male / Female, lenght 1.8m. Can be used with IP Power 9258 range to connect to your PC / Server
