Module M1 with 1 analog output for signal retransmission in 4/20mA configurable as active or passive. Isolated. For instruments from Series C and Series MBR.
AC-DC Ultra slim DIN rail power supply 12V/1.25A. With electronic protection against short circuit, overload and overvoltage. The possibility of fine-tuning the output voltage with a trimmer.
Papouch Pt100 sensor: -90 to +250 °C, metal rod
Power adapter that allows you to use USB port to power 5V device. Cable length: 1,8 m Jack connector 3.5 x 1.35 mm. Plus pole inside. Suitable example for TME, TH2E
ZCC963 , 15 ft Long , DB9 Female to Cable Assembly , CC15 , Material - Polyurethane , 28 Awg 6 Conductors , Braided Shielded , For TFF500
Quido ETH 60/3 includes 60 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two sta
Quido ETH 100/3 includes 100 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two s
Quido ETH 10/1 includes 10 digital inputs, 1 output and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two stat
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 60/3 and 100/3. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with a suitable fitting. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 8/8. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included in order to mount the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Straight Patch cable for computer network. Cable length 1m. Suitable for connecting any Ethernet device to a hub or switch. Cat5e, shielded, grey. (Photo illustration.)
APA300 , IPM650 Power Supply Kit with Interchangeable AC Plugs, 18 W, 15 VDC Output , 5 ft Long
ZCC994 , Sensor Panel Mount Cable Assembly , also Supports Sensors w/ TEDS Kits , for IPM650 w/ GOD02975 or FSH03585
LCB500 , Tension & Compression Load Cell w/ Male Center Stud , RoHS Compliant, Material - 17-4 PH S.S. , 1/2-20-Thread , 6 Pin Bendix Receptacle, PT02E-10-6P
TDF400, Reaction Torque Sensor w/ Flange , RoHS Compliant , Material - 2024-T4 , 1/4-Sq. Drive , Overload Protection , 4 Pin Lemo Receptacle, EGG.0B.304.CLL
TDD400, Reaction Torque Sensor w/ Sq Drive , RoHS Compliant , Material - 2024-T4 , 1/4-Sq. Drive , Overload Protection , 4 Pin Lemo Receptacle, EGG.0B.304.CLL
Model: ZCC939, 15 ft Long , 4 Pin Right Angle Lemo FHG.0B.304.CLAD35 to Cable Assembly, CC4 Connection , Material - PVC , 28 Awg 4 Conductors , Braided Shielded, (Connector orientation cannot be ensured)
Model: Rod End Bearing (Female) 1 1/2-12 Female Thread, Zinc-Plated Steel Material, Max Load 64000 lb
