The PRTemp1000D is a differential pressure and temperature data logger with NPT differential fitting. Includes ISO17025 accredited calibration certificate.
The MicroRHTemp is a miniature, humidity and temperature data logger. Includes ISO17025 accredited calibration certificate.
The ThermoVault is an oven temperature profiling system. Includes standard calibration certificate.
The RFTemp2000A is a wireless ambient temperature data logger. Includes ISO17025 accredited calibration certificate
The RFTCTemp2000A is a wireless thermocouple-based temperature data logger. Includes standard calibration certificate
Wireless transceiver for the RFOT, ThermAlert and RF2000A series
The RFRHTemp2000A is a wireless temperature and humidity data logger. Includes ISO17025 accredited calibration certificate.
The RHTemp101A is a compact, humidity and ambient temperature data logger. Includes ISO17025 accredited calibration certificate
Low cost solution to measure temperatures from -50 ° C till + 99 ° C on display. NTC sensor (rubber encapsulted included) Power supply 230VAC / 50Hz. Equipped with 1 x Relay output for adjustable alarm!
IPM650 Pro, Intelligent Panel Meter, mV / V, VDC, Current Measurement, Analog Output, Alarm Relays, TEDS and USB Output
PyroCouple - Optics 2:1, Range -20 to +100°C, 4-20mA
QuidoDuplex RS is a set of two I/O modules for RS485 line (two wires only) with a special firmware designed specificaly to transmit digital I/Os over RS485 line as an autonomous system
Thermometer for Quido - PVC. Length: depends on version Temperature ranges: -55 through +125 °C
Easy to use and very accurate temperature probe. Features a waterproof stainless-steel probe, a high-level linear output of 10 mV per degree F, a typical accuracy of ± 0.4 ° F (± 0:22 ° C) at room temperature, and a range of 0 to +300 ° F ( -17 to + 150 °
The RB12 Provides a convenient interface to industry standard I / O modules, allo wing electricians, engineers, and other Qualified Individuals, to interface a Labjack with high voltages / currents. Logic buffers are used to providence the 10-15 mA needed
Provides screw terminal connections for the Labjack U12's 16 additional digital I / O. A screwdriver and DB25 cable are included. For the U12 Labjack only.
Signal conditioning module designed to divide two single-ended channels or higher voltage analog signals down to 0-2.5 volt signals.
PCB Board OEM version of Labjack U6-PRO, 24-bit sigma-delta AD, Wide input range, Amazing price performace ratio
Cable Assembly , 6 inch Long , 5 Position JST 05SR-3S Both Ends , 30 Awg Black Wires , Mates to QSH02312 & QSH02350 for SPI Output
Cable Assembly , 6 inch Long , 4 Position JST 04SR-3S Both Ends , 30 Awg Black Wires , Mates to QSH02312 & QSH02350 for Power & UART
Excelog One - Miniature Handheld Thermocouple Data Logger and Simulator
USB to UART Converter, Bus Powered, Type A Connector, 5 ft [1.5 m] Long , 7 Pin Nano Mating Connector , Anodized Aluminum Shell , 30 AWG 7 Conductor Cable with Polyurethane Jacket , RoHS
PyroMiniUSB - PMUXCF, Close Focus optics - (3.5 mm @ 50 mm)
USB Infrared Temperature Sensor for Benchtop, Laboratory and Education
