Collection

CU-A-MINIB-2

CABLE USB -A PLUG MINI - B USB 5 P , 2 METER

CU-A-MINIB-1

CU-A-MICROB

PC Programmer Cable SENECA, USB cable plug USB-A - MicroUSB-B - 5P

PC151HT-0

PyroCouple - Optics 15:1, Range 0 to +500°C, 4-20mA

PC21HT-0

PyroCouple - Optics 2:1, Range 0 to +500°C, 4-20mA

Power Cable 230VAC, 1.5m-Straight-FWL

Power Cable 230VAC, 1.5m-Straight-Flying Wire Leads

DNS Inclination Switch

Inclination Switch Programmable ±10°, ±45°, ±85°
Electronic inclination switch with the latest MEMS-senor technology. The series DNS has a build-in display and with 3 push-buttons for easy programming

I-7530A-G CR

Converter/RS-232/485/422 to CAN

PAPAGO 2TC-WIFI

Papago 2TC WiFi: 2x thermometer for K-type thermocouple with WiFi. (Sensors not included)

PAPAGO 2TH WIFI

Papago 2TH WIFI: 2x temperature, humidity and dew point with Wi-Fi.

Waterbox Maintenance Kit

Maintenance kit for the Waterbox101A.

PR140-O-Ring

One Set of Replacement O-Rings for the PR140.

Level2000-O-Ring

One set of replacement O-rings for Level2000.

CF200

Canning Fitting for the HiTemp140 Data Loggers

CT-H608

Split core current relay switch, monitors 1.25-50 Amps, adjustable set point between 1.25-50 Amps, status LED's.

IFC203

USB Interface Cable Package for the TransiTemp-EC Data Logger

WaterboxOB3K

Customized weatherproof enclosure for use with the QuadTemp, OctTemp, QuadTemp2000 and OctTemp2000 Data Loggers.

WM-300

The WM-300 is a wall-mounting station that is built for use with the Cryo-Temp and LyoTemp. It can be mounted using the adhesive tape along the back or it can be screwed to a wall or any flat surface.

IRTC101A

The IRTC101A is an infrared, thermocouple-based temperature data logger. Includes standard calibration certificate.

M12 RTD Rigid Probe

100 Ω platinum RTD probe with M12 connector.

HiTemp140-M12

The HiTemp140-M12 is a rugged and versatile high temperature data logger featuring an M12 probe connector.

MagMount-1

Magnetic Holder for use with the PR140, HiTemp140 Series and 1000 Series Data Loggers.

LJTick-InBuff

Very low bias current (1pA) input buffer-which can directly measure pH sensors (electrode type sensors) and other weakly driven or high source impedance signals. The analog inputs on our compatible DAQ products (U3, U6, UE9, T7) have typical bias cu ...

LJTick-LVDigitalIO

A bidirectional shifting logic board for converting 3.3V down to 2.5V or 1.8V logic. There is ook a VOUT terminal-which can power source at the selected voltage. Useful for users who have external boards That run on lower logic thresholds, or simply ...