LSB205 , JR S-Beam Load Cell 2.0 , Overload Protection w/ Integrated TEDS IEEE1451.4 Recognition & Temperature Sensor , RoHS Compliant , Material - 17-4 PH S.S. , M3x0.5-Thread , 7 Pin Quick Disconnect "Break Away" Nano Receptacle
PT1000, 4 wires, class A, 4 x 50 mm SS316 , and 10 meters Teflon cable. - IP67
Fixed Gain Bridge Amplifier, Gain 1000x (1mV/V)
The AVS140-6 is a complete system for performing autoclave validations and assisting with 21 CFR Part 11 compliance. Includes ISO17025 accredited calibration certificates.
TCP2RTU is a transparent converter of the MODBUS TCP protocol running over Ethernet, into the MODBUS RTU protocol, running on RS485 lines.
Connection Cable for femto/nano/pico. Angled connector, Length 5 meter, Material PVC, M8x1x0,25 mm
OEM board-only version of the Labjack U12
USB-based multifunction data acquisition and control. A breakthrough price / performance ratio. This is the original Labjack from Labjack Corporation USA!
Industrial HART temperature transmitter for DIN-head mounting. Supports thermocouples and RTDs and converts temperature into a stable 4–20 mA signal. Universal input, high accuracy (±0.1 °C) and fully configurable via HART.
IDC150, Compact mV/V to SPI/UART Digital Signal Conditioner, Up To 1300 SPS or 18.4 Bits Noise Free Resolution , Terminal Block and JST Connectors
Converter for Frequency, Impulses, RPM speed/Flow. Output 4/20mA or 0/10Vdc. Isolated 3 way. Configurable for NPN, PNP, Pick-up, Namur, Dry contacts. Dedicated input to measure frequency from AC voltage up to 600 Vac. From 1 Hertz up to 1 MHertz
Loadcell Amplifier, +5 Vdc excitation with ‘sense’. Connect of up to 4 load cells (350 Ohms), 4 and 6 wire sensors, uni- and bipolar ranges up to ±80 mV. Output 4/20 mA (active or passive) and 0/10 Vdc. Power supply 18 to 265 VAC/DC, 3 way isolated.
PAPAGO Meteo RS - Industrial weather station with RS485 ModBus
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
LTH350 , Through Hole Donut Load Cell , RoHS Compliant, Material - 17-4 PH S.S. ,Various ID, 24 Awg 4 Conductor Braided Shielded Teflon Cable , 10 ft Long
TRS300 - mV/V - Slip-Ring Shaft-to-Shaft Rotary Torque Sensor, Ranges selectable from 10 Nm to 1000 Nm
The TCTempX - Thermocouple temperature data loggers. You can choose from 4 models with 4, 8, 12 and 16 channels
LCM100 , Sub-Miniature Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Lead Free, Material - 17-4 PH S.S. , M3x0.5-Thread , 34 Awg 4 Conductor Braided Cable , 5 ft Long
The Volt101A is a compact, low level, DC voltage data logger. Includes standard calibration certificate.
SENSIT® Test and Measurement Software. 1 Year Time-Limited License. Compatible with Windows 10 and Windows 11. One License Required Per Seat
