IAA200, Full Bridge Strain Gage Signal Conditioning Current Transmitter, 4-20 mA, 12 mA Offset DIP Switch, Up to 25 kHz Bandwidth, Detachable Screw Terminal Connectors, Metallic Enclosure, integrated 35 mm DIN Clip
The Wind101A is a data logging system to measure and record wind speed. Includes declaration of conformance
The TC101A is a compact, thermocouple-based temperature data logger. Includes standard calibration certificate
Provides convenient screw terminals for the DB37 connector on the LabJacks. Includes a screwdriver. Is compatible with LJTick signal-conditioning modules.
Power adapter that allows you to use USB port to power 5V device. Cable length: 1,8 m Jack connector 3.5 x 1.35 mm. Plus pole inside. Suitable example for TME, TH2E
TRS605, ±5VDC - Shaft-to-Shaft Rotary Torque Sensor + Encoder for RPM/Angle, Ranges selectable from 1 Nm to 1000 Nm
Head terminal + 2 slot 17.5mm DIN rail bus system for Z-PC Line I/O fast mounting and connection
PyroCouple - Optics 15:1, Range 0 to +250°C, 4-20mA
The Titan S8 is a state-of-the-art, powerful, 8-channel data acquisition system. With the ability to simultaneously measure and Record Temperature, Voltage, Current, Pulse & Frequency, the Titan S8 is an all-in-one solution for any application
PT1000, 4 wires, class A, 6 x 50 mm SS316 , and 3 meters silicone cable. - IP67
Tmax : 180°C
The TKAD DIN rail mounting clip is used for mounting a Labjack device to a DIN rail.
HiTemp140-TC thermocouple data logger with SMP thermocouple plug-in connector.
TFF325 , OEM Reaction Torque Sensor , RoHS Compliant , Material - 2024-T4 , 29 Awg 4 Conductor Spiral Teflon Cable , 6 in Long
WiFi serial server with RS232 / RS485 port featuring Vout power output, that can power your external device and remotely turn it on and off. TCP, UDP and HTTP GET protocols. Easy configuration via responsive web interface.
Very low bias current (1pA) input buffer-which can directly measure pH sensors (electrode type sensors) and other weakly driven or high source impedance signals. The analog inputs on our compatible DAQ products (U3, U6, UE9, T7) have typical bias cu ...
Measure the value of Humidity and Temperature and record in PC by USB connection
The LJTick-Proto (LJTP) Consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN / AIN / GND / VS screw terminal block found on newer LabJacks zoals the U3 and UE9. Includes three...
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 4/4. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
The PR1000 is a temperature, pressure and transient pressure data logger with an NPT fitting. Includes ISO17025 accredited calibration certificate.
LTH500 , Donut Load Cell , RoHS Compliant, Material - 17-4 PH S.S. , Various ID, with 4 Pin Micro Receptacle
