TFF500, 100 in-lb, Thru Hole Reaction Torque Sensor w/ TEDS, Non-Amplified mV/V Output, RoHS Compliant, Material - 2024-T4, 3/4" [19.05 mm] ID, TEDS (IEEE 1451.4) Recognition, DB9 Male Connector, to fit Prime 017PLX
Quido ETH 0/2 includes 2 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. The outputs are relays with a changeover contact. The thermometer can be connected to a cable of
TDF600, Reaction Torque w/ Flange to Sq. , Standard , Material - 17-4 PH S.S. , 1/2-Sq. Drive , 6 Pin Bendix Receptacle, PT02A-10-6P
Model: ZCC939, 15 ft Long , 4 Pin Right Angle Lemo FHG.0B.304.CLAD35 to Cable Assembly, CC4 Connection , Material - PVC , 28 Awg 4 Conductors , Braided Shielded, (Connector orientation cannot be ensured)
LLB130 , Subminiature Load Button , Material - 17-4 PH S.S., RoHS Compliant, 34 Awg 4 Conductor Braided Cable , 5 ft Long
LSB205 , JR S-Beam Load Cell 2.0 , Overload Protection w/ Integrated TEDS IEEE1451.4 Recognition & Temperature Sensor , RoHS Compliant , Material - 17-4 PH S.S. , M3x0.5-Thread , 7 Pin Quick Disconnect "Break Away" Nano Receptacle
Pt100/3 wire Robust Penetration Sensor 6 x 145mm, +180°C
PT1000, 4 wires, class A, 4 x 50 mm SS316 , and 10 meters Teflon cable. - IP67
Large Display for displaying Temperature or other engineering units. Input Pt100, Thermocouple, NTC, PTC, 4-20mA, 0-10V. With mounting bracket. Analog output 0-10V, 4-20mA and Modbus RS485
PAPAGO TH 2DI DO is used as an environment monior – it measures temperature, humidity and dew point. It also has 2 Digital Inputs and 1 Relay Output.
The LNDS is a data logging system for ultra-low temperature monitoring. Includes standard calibration certificate.
The RFPRHTemp2000A is a wireless pressure, humidity and temperature data logger. Includes standard calibration certificate.
Intelligent digital RS485 sensor for temperature and / or humidity measurement.
Loadcell / Wheatstone Bridge Data Logger. The Bridge101A supplies a 2.5V voltage excitation voltage and accepts signals from strain gauges, load cells and other low-level DC voltage sources.
The Volt101A is a compact, low level, DC voltage data logger. Includes standard calibration certificate.
The Process101A is a compact, low level DC current data logger. Includes standard calibration certificate.
RHTemp1000 is a compact, humidity and temperature data logger. Includes ISO17025 accredited calibration certificate.
Range -55 ° C to + 80° C. A direct text output of the temperature value in ° C (ASCII) no conversion is needed. No external power supply is needed. Low price.
TMU is a simple thermometer with a USB interface. The thermometer uses the USB interface for communication and usefull as a power source. It Measures temperatures from -55 ° C to +125 ° C.
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I / O block, and osmanthus up to 10 or thesis can be used by Labjack to add 20 analog outputs. Works with any family UD device (U3 / U6 / UE9), except for U3 har
Labjack U6, 16+ bits of resolution, wide input range, Amazing price performace ratio
The Light101A is a compact, light data logger equipped with a built-in light sensor that monitors and records the occurrence and duration of light exposure.
NanoTemp125 - Miniature High Temperature Data Logger, available with a 1", 2" and 5,25" probe
