LSB350 , Tension & Compression Load Cell , Standard , Material - 2024-T4 , M12x1.75-Thread , 4 Pin Lemo Receptacle, EGG.0B.304.CLL
LSB201 , JR S-Beam Load Cell 2.0 , Overload Protection , RoHS Compliant , Material - 17-4 PH S.S. , M3x0.5-Thread , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 5 ft Long
IQ/OQ/PQ Secure Software Validation Workbook and Software Package.
ATEX, IECEx, FM Certified. The RHTemp1000Ex humidity and temperature data logger carries hazardous location and intrinsically safe certification (ATEX, IECEx, FM 3610). Includes ISO 17025 accredited calibration certificate
Universal converter with bipolar mA / V output
RS232/USB, TTL/USB, RS485/USB asynchronous and optoisolated serial converter
EASY-USB can be use to configure a SENECA device that has an UART TTL serial port.
T121 is a converter for Thermoresistance (mA, mV, PT100, Pt1000, Pt500, Ni100, TCs, Ohm)
PyroCouple - Optics 15:1, Range 0 to +250°C, 4-20mA
Pt100 external temperature sensor, Class A, external sensor and junction box, IP65
One set of replacement O-rings for the Waterbox101A.
316 stainless steel, 1/8 NPT to Female luer lock adapter.
Customized weatherproof enclosure for use with the QuadTemp, OctTemp, QuadTemp2000 and OctTemp2000 Data Loggers.
100 Ω platinum RTD probe with clean-in-place (CIP) design and M12 connector.
Magnetic Holder for use with the PR140, HiTemp140 Series and 1000 Series Data Loggers.
Converts 3.3V to 5V digital outputs digital outputs. Easily control 5V relays, or interface with a 5V logic device.
That accessory voltage reference outputs a stable 4.096V. Commonly used as an excitation voltage for bridge circuits. Simply attach the supply side of the bridge to the 4096 terminal, and ground to the GND terminal. The IOA and IOB lines are simply ....
Increases the output current of the DAC outputs on Labjack devices. Can also be used for switched 3.3V When attached to a 3.3V digital I / O line. Labjack devices can not output more than about 15mA On Their DAC0 DAC1 and analog outputs, so this acce...
That accessory voltage reference outputs a stable 2.5V. Commonly used as an excitation voltage for various circuits. The IOA and IOB lines are pass-through terminals, and do not interact with the accessory in any way.
