The CF202 Canning Fitting securely attached MadgeTech HiTemp140-CF data logggers to jars, lids, cans and other containers for internal temperature monitoring for heat penetration tests and temperature distribution studies.
Isolator /Converter Universal Input mV to 1000V and 4-20mA, Output 4-20mA
EX9017 16 bit RS485 analog In I/O device with 8 analog In. Measures +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V in range ±20mA. Wide temperature range
TCP2RTU WiFi is a transparent both directions converter of the MODBUS TCP protocol, running over WiFi, into the MODBUS RTU/ASCII protocol, running over RS232, RS485 and RS422 lines.
LSM305, Parallelogram Load Cell with TEDS and PT1000 RTD , RoHS Compliant , Material - 2024-T4 , #10-32-Thread , Overload Protection , 8 position 0.039" (1.00mm) JST Connector
LLB500 Load Button Load Cell , RoHS Compliant, Bottom #6-32 Tapped Holes , Material - 17-4 PH S.S. , 4 Pin Micro Receptacle
LCM300 ,Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Compliant , IP67 Rated, Material - 17-4 PH S.S. , M6x1-Thread , 4 Pin Micro Receptacle
Quido ETH 30/3 includes 30 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two sta
Quido ETH 2/32 includes 2 digitl inputs, 32 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two stat
Quido ETH 4/4 includes 4 digital inputs, 4 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two state
Plastic operating tool (lever) for WAGO 236 Cage Clamp terminal
USB320 , External USB Output Kit , 24 Bit Resolution , Up To 21 Bit Noise Free , Standard , For Amplified Inputs (Voltage Only) , Up to 4800 SPS
The PR1000 is a temperature, pressure and transient pressure data logger with an NPT fitting. Includes ISO17025 accredited calibration certificate.
Model: IHH500 Accessory Kit , Pelican Case , Software (FSH03189) , USB Cable , Support Bracket , Analog/Alarm Mating Connector , Sensor Mating Connector
LCB450 , High Capacity Load Cell (Rod End/Fatigue Rated) , RoHS Compliant , Material - 17-4 PH S.S. , 1-14-Thread , Fatigue Rated , 6 Pin Bendix Receptacle, PT02A-10-6P
LCF450 , Low Profile Universal Pancake , RoHS Compliant, Material - 17-4 PH S.S. , 5/8-18-Thread , 6 Pin Bendix Receptacle, PT02E-10-6P
TRD605 - 5VDC - Square Drive Rotary Torque Sensor + Encoder, Ranges selectable from 12 Nm to 1000 Nm
TRH300 - mV/V - Hex-Drive - Slip-Ring Rotary Torque Sensor, Ranges selectable from 2 Nm to 20 Nm
LLB250 , Subminiature Load Button , Material - 17-4 PH S.S., RoHS Compliant, 34 Awg 4 Conductor Braided Cable , 5 ft Long
LBB200 , 0.25 lb , Bending Beam Load Cell , Standard , Material - 17-4 PH S.S. , 28 Awg 4 Conductor Braided Shielded Clear PVC , 1 ft Long
LCM525 , 20000 lb , Threaded Rod Load Cell , RoHS Compliant, Material - 17-4 PH S.S. , M24x3 Thread , 4 Pin Micro Receptacle
LCM375, Tension & Compression Load Cell , RoHS Compliant , Material - 17-4 PH S.S. , M16x2-Thread , 4 Pin Micro Receptacle
Model: Rod End Bearing (Female) M10x1.5 Female Thread, Zinc-Plated Steel Material, Max Load 5100 lb (F2123-11)
