Heat Penetration Testing System with HiTemp140-CF, CF202 and ThermaLock,
The CF202 Canning Fitting securely attached MadgeTech HiTemp140-CF data logggers to jars, lids, cans and other containers for internal temperature monitoring for heat penetration tests and temperature distribution studies.
Isolator for Voltage AC/DC, mV to 1000V (TRMS), Analog Output ±10V or 4-20mA
PIMZOS Current Transducers AC/DC to 4-20mA with Isolation
LynxPro-RTD - Bluetooth Enabled RTD Temperature Data Logger with LCD Display
USB to UART Converter, Bus Powered, Type A Connector, 5 ft [1.5 m] Long , 7 Pin Nano Mating Connector , Anodized Aluminum Shell , 30 AWG 7 Conductor Cable with Polyurethane Jacket , RoHS
Converter for AC/DC signals. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways.
AC-DC Ultra slim DIN rail power supply 12V/1.25A. With electronic protection against short circuit, overload and overvoltage. The possibility of fine-tuning the output voltage with a trimmer.
PyroMiniUSB - PMUXCF, Close Focus optics - (3.5 mm @ 50 mm)
USB Infrared Temperature Sensor for Benchtop, Laboratory and Education
LSB400 Tension & Compression Load Cell , Material - 17-4 PH S.S. , M16x2-Thread , 4 Pin Lemo Receptacle, EGG.0B.304.CLL
TDF675, 24000 in-lb, Reaction Torque w/ Flange to Sq., RoHS Compliant, Material - 17-4 PH S.S., 1" Sq. Drive, 6 Pin Bendix Receptacle, PT02H-10-6P
Quido ETH 3/0 includes 3 digital inputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two states (0 and 1)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 60/3 and 100/3. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
TFF425, Reaction Torque w/ Flanges , RoHS Compliant , Material - 2024-T4 , Overload Protection , 4 Pin Lemo Receptacle, EGG.0B.304.CLL
APA300 , IPM650 Power Supply Kit with Interchangeable AC Plugs, 18 W, 15 VDC Output , 5 ft Long
ZCC994 , Sensor Panel Mount Cable Assembly , also Supports Sensors w/ TEDS Kits , for IPM650 w/ GOD02975 or FSH03585
Model: ZCC975 , DB15 Male Cable Assembly , Mates to MTA600/QMA100, Material - PVC , 3x 28 Awg 4 Conductors , Braided Shielded with Mesh Sleeving
LSM300 , Parallelogram Load Cell , RoHS Compliant , Material - 2024-T4 , #10-32-Thread , Overload Protection , 29 Awg 4 Conductor Spiral Teflon Cable , 6 in Long
XAD400 , Thread, Gear Shift Adapter for MAU300 sensors
LLB390 , 1 lb , Ultra Thin Load Button w/ Mounting , RoHS Compliant, 1000 Ohm , Material - 17-4 PH S.S. , 34 Awg 4 Conductor Braided Shielded Polyester Cable , 10 ft Long