High Perforemance Multifunction DAQ with, Ethernet, and USB, 16-bit ADC, 100kS / s, plus 802.11b / g WiFi and 24-bit ADC
LabJakc U3-HV. USB based multifunction data acquisition and control device, with 16 Flexible IO.
USB or Ethernet multifunction DAQ device with up to 12 analog inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers
LabJack T8 - The new flagship DAQ from LabJack USA
Provides convenient screw terminals for the DB37 connector on the LabJacks. Includes a screwdriver. Is compatible with LJTick signal-conditioning modules.
USB-based multifunction data acquisition and control. A breakthrough price / performance ratio. This is the original Labjack from Labjack Corporation USA!
Labjack U6, 16+ bits of resolution, wide input range, Amazing price performace ratio
High Performance Multifunction DAQ with, Ethernet, and USB, 16-bit ADC, 100kS / s.
The LJTick Relay Driver Allows two digital I / O lines on a U3, U6, or UE9 to each control a relay or other moderate load.
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I / O block, and osmanthus up to 10 or thesis can be used by Labjack to add 20 analog outputs. Works with any family UD device (U3 / U6 / UE9), except for U3 har
The LM34CAZ is the most accurate version of the LM34 precision temperature sensor made by Texas Instruments. It has a very convenient output of 10mV per ° F, so 0.78V would correspond to 78 ° F.
Easy to use and very accurate temperature probe. Features a waterproof stainless-steel probe, a high-level linear output of 10 mV per degree F, a typical accuracy of ± 0.4 ° F (± 0:22 ° C) at room temperature, and a range of 0 to +300 ° F ( -17 to + 150 °
Converts 3.3V to 5V digital outputs digital outputs. Easily control 5V relays, or interface with a 5V logic device.
The Mux80 is an analog input expansion board That Increases the number of analog inputs for a possible Labjack unit. It can be connected to a U6 UE9 directly or through the DB37 connector. Ten of the Labjack's analog inputs are multiplexed (1: 8 each ...
That accessory voltage reference outputs a stable 4.096V. Commonly used as an excitation voltage for bridge circuits. Simply attach the supply side of the bridge to the 4096 terminal, and ground to the GND terminal. The IOA and IOB lines are simply ....
Signal conditioning module designed to divide two single-ended channels or higher voltage analog signals down to 0-2.5 volt signals.
The RB12 Provides a convenient interface to industry standard I / O modules, allo wing electricians, engineers, and other Qualified Individuals, to interface a Labjack with high voltages / currents. Logic buffers are used to providence the 10-15 mA needed
Signal conditioning module biedt two instrumentation amplifiers ideal for low-level signals zoals bridge circuits (eg strain gauges) and thermocouples.
The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors.
voltage signal conditioning unit from 4-20 mA signals.
Labjack U6-PRO, 24-bit sigma-delta AD, Wide input range, Amazing price performace ratio
Increases the output current of the DAC outputs on Labjack devices. Can also be used for switched 3.3V When attached to a 3.3V digital I / O line. Labjack devices can not output more than about 15mA On Their DAC0 DAC1 and analog outputs, so this acce...
