LabJack Corporation. - USA Data Acquisition Systems | LabJack DAQ Systems Analog & Digital I/O Superior Data Acquisition Systems to collect analog & digital sensors. Log, automate and test. Use software like LabVIEW, MatLAB, Python, C, C++, DAQFactory Show more
LabJakc U3-HV. USB based multifunction data acquisition and control device, with 16 Flexible IO.
USB or Ethernet multifunction DAQ device with up to 12 analog inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers
High Performance Multifunction DAQ with, Ethernet, and USB, 16-bit ADC, 100kS / s.
USB-based multifunction data acquisition and control. A breakthrough price / performance ratio. This is the original Labjack from Labjack Corporation USA!
Easy to use and very accurate temperature probe. Features a waterproof stainless-steel probe, a high-level linear output of 10 mV per degree F, a typical accuracy of ± 0.4 ° F (± 0:22 ° C) at room temperature, and a range of 0 to +300 ° F ( -17 to + 150 °
LabJack T8 - The new flagship DAQ from LabJack USA
High Perforemance Multifunction DAQ with, Ethernet, and USB, 16-bit ADC, 100kS / s, plus 802.11b / g WiFi and 24-bit ADC
Signal conditioning module designed to divide two single-ended channels or higher voltage analog signals down to 0-2.5 volt signals.
Labjack U6, 16+ bits of resolution, wide input range, Amazing price performace ratio
Provides convenient screw terminals for the DB37 connector on the LabJacks. Includes a screwdriver. Is compatible with LJTick signal-conditioning modules.
The LJTick Relay Driver Allows two digital I / O lines on a U3, U6, or UE9 to each control a relay or other moderate load.
The RB12 Provides a convenient interface to industry standard I / O modules, allo wing electricians, engineers, and other Qualified Individuals, to interface a Labjack with high voltages / currents. Logic buffers are used to providence the 10-15 mA needed
OEM board-only version of the Labjack U12
Converts 3.3V to 5V digital outputs digital outputs. Easily control 5V relays, or interface with a 5V logic device.
Increases the output current of the DAC outputs on Labjack devices. Can also be used for switched 3.3V When attached to a 3.3V digital I / O line. Labjack devices can not output more than about 15mA On Their DAC0 DAC1 and analog outputs, so this acce...
The LM34CAZ is the most accurate version of the LM34 precision temperature sensor made by Texas Instruments. It has a very convenient output of 10mV per ° F, so 0.78V would correspond to 78 ° F.
The PS12DC is a power switching board designed for medium to low current DC power switching applications. Controlled through 12 digital outputs, the board can switch power sources ranging from 5 to 28V DC. Attach the PS12DC to the DB15 connector pr ....
Easy to use and inexpensive temperature probe. Features a plastic probe, a high-level linear output of 10 mV per degree K, a typical accuracy of ± 1 ° C (± 1.8 ° F) at room temperature, and a range of -40 to +100 ° C (-40 to +212 ° F).
Signal conditioning module biedt two instrumentation amplifiers ideal for low-level signals zoals bridge circuits (eg strain gauges) and thermocouples.
The TKAD DIN rail mounting clip is used for mounting a Labjack device to a DIN rail.
T7-Pro OEM from Labjack. OEM Version, PCB Only
The Mux80 is an analog input expansion board That Increases the number of analog inputs for a possible Labjack unit. It can be connected to a U6 UE9 directly or through the DB37 connector. Ten of the Labjack's analog inputs are multiplexed (1: 8 each ...
The RB16 biedt a versatile method for electricians, engineers, and other Qualified Individuals, to interface a Labjack U12 with high voltages / currents. The included DB25 cable connects the RB16 to a Labjack U12. The RB16 HAS mounting sockets for you ...
Data Acquisition Systems | LabJack DAQ Systems Analog & Digital I/O
Superior Data Acquisition Systems to collect analog & digital sensors. Log, automate and test. Use software like LabVIEW, MatLAB, Python, C, C++, DAQFactory
