Customer Support
0
Close

Categories

Filters

    LabJack

    LabJack Corporation. - USA Data Acquisition Systems | LabJack DAQ Systems Analog & Digital I/O Superior Data Acquisition Systems to collect analog & digital sensors. Log, automate and test. Use software like LabVIEW, MatLAB, Python, C, C++, DAQFactory Show more

    Authorised Distributor for :

    Communication Protocol

    Price

    -
    43 Products
    U6-PRO-OEM

    U6-PRO-OEM

    PCB Board OEM version of Labjack U6-PRO, 24-bit sigma-delta AD, Wide input range, Amazing price performace ratio

    € 405,- Excl. tax
    View
    U6-OEM

    U6-OEM

    PCB Board OEM version of Labjack U6, 16+ bits of resolution, wide input range, Amazing price performace ratio

    € 360,- Excl. tax
    View
    LJTick-Resistance

    LJTick-Resistance

    The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors.

    € 40,50 Excl. tax
    View
    LJTick-VRef-41

    LJTick-VRef-41

    That accessory voltage reference outputs a stable 4.096V. Commonly used as an excitation voltage for bridge circuits. Simply attach the supply side of the bridge to the 4096 terminal, and ground to the GND terminal. The IOA and IOB lines are simply ....

    € 36,- Excl. tax
    View
    LabJack T7-OEM

    LabJack T7-OEM

    T7 OEM from Labjack. OEM Version, PCB Only

    € 468,- Excl. tax
    View
    CB15

    CB15

    Provides convenient screw terminals for the DB15 connector on Labjacks. Includes a screwdriver.

    € 29,70 Excl. tax
    View
    LJTick-Divider

    LJTick-Divider

    Signal conditioning module designed to divide two single-ended channels or higher voltage analog signals down to 0-2.5 volt signals.

    € 31,50 Excl. tax
    View
    LabJack U3-HV-OEM

    LabJack U3-HV-OEM

    U3-HV-OEM. (PCB only!)

    € 121,50 Excl. tax
    View
    LJTick-LVDigitalIO

    LJTick-LVDigitalIO

    A bidirectional shifting logic board for converting 3.3V down to 2.5V or 1.8V logic. There is ook a VOUT terminal-which can power source at the selected voltage. Useful for users who have external boards That run on lower logic thresholds, or simply ...

    € 22,50 Excl. tax
    View
    LM34CAZ Silicon Temperature Sensor

    LM34CAZ Silicon Temperature Sensor

    The LM34CAZ is the most accurate version of the LM34 precision temperature sensor made by Texas Instruments. It has a very convenient output of 10mV per ° F, so 0.78V would correspond to 78 ° F.

    € 11,70 Excl. tax
    View
    Mux80

    Mux80

    The Mux80 is an analog input expansion board That Increases the number of analog inputs for a possible Labjack unit. It can be connected to a U6 UE9 directly or through the DB37 connector. Ten of the Labjack's analog inputs are multiplexed (1: 8 each ...

    € 166,50 Excl. tax
    View
    EI1022

    EI1022

    Easy to use and inexpensive temperature probe. Features a plastic probe, a high-level linear output of 10 mV per degree K, a typical accuracy of ± 1 ° C (± 1.8 ° F) at room temperature, and a range of -40 to +100 ° C (-40 to +212 ° F).

    € 37,80 Excl. tax
    View
    CB25

    CB25

    Provides screw terminal connections for the Labjack U12's 16 additional digital I / O. A screwdriver and DB25 cable are included. For the U12 Labjack only.

    € 48,60 Excl. tax
    View
    LJTick-Proto

    LJTick-Proto

    The LJTick-Proto (LJTP) Consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN / AIN / GND / VS screw terminal block found on newer LabJacks zoals the U3 and UE9. Includes three...

    € 12,60 Excl. tax
    View
    Mux80-OEM

    Mux80-OEM

    OEM Version of Mux80. (PCB Only!)

    € 157,50 Excl. tax
    View
    LJTick-OutBuff

    LJTick-OutBuff

    Increases the output current of the DAC outputs on Labjack devices. Can also be used for switched 3.3V When attached to a 3.3V digital I / O line. Labjack devices can not output more than about 15mA On Their DAC0 DAC1 and analog outputs, so this acce...

    € 22,50 Excl. tax
    View
    LJTick DAC

    LJTick DAC

    Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I / O block, and osmanthus up to 10 or thesis can be used by Labjack to add 20 analog outputs. Works with any family UD device (U3 / U6 / UE9), except for U3 har

    € 85,50 Excl. tax
    View
    LabJack U12-NTH-OEM

    LabJack U12-NTH-OEM

    OEM board-only version of the Labjack U12, NTH Version

    € 202,50 Excl. tax
    View
    LabJack T7-Pro-OEM

    LabJack T7-Pro-OEM

    T7-Pro OEM from Labjack. OEM Version, PCB Only

    € 711,- Excl. tax
    View

    LabJack Corporation. - USA

    Data Acquisition Systems | LabJack DAQ Systems Analog & Digital I/O

    Superior Data Acquisition Systems to collect analog & digital sensors. Log, automate and test. Use software like LabVIEW, MatLAB, Python, C, C++, DAQFactory

    Recently viewed

    Compare 0

    Add another product (max. 5)

    Start comparison

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »