Cable Assembly , 6 inch Long , 4 Position JST 04SR-3S Both Ends , 30 Awg Black Wires , Mates to QSH02312 & QSH02350 for Power & UART
Excelog One - Miniature Handheld Thermocouple Data Logger and Simulator
The CF202 Canning Fitting securely attached MadgeTech HiTemp140-CF data logggers to jars, lids, cans and other containers for internal temperature monitoring for heat penetration tests and temperature distribution studies.
Module A1 with 1 relay output for instruments from Series C and MBR. Relay with 3 contacts (NO, NC, Common) with swtiching up to 250Vac @8A.
Wall holder 90° for TQS4 O. With this holder you can place the sensor further from the wall.
The sensor is not included in the delivery.
LMD300 , 50 lb , Pinch Sensor with TEDS IEEE1451.4 and PT1000 RTD , RoHS Compliant , Material - 2024-T4 , 11 Position Circular Nano Connector
Eight-way splitter of RS232 line. The data from the main line is transmitted without any change simultaneously to all eight lines. This allows for multiple devices to be connected to one RS232 line.
EX9017 16 bit RS485 analog In I/O device with 8 analog In. Measures +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V in range ±20mA. Wide temperature range
DA converter with 2 Voltage or Current outputs with RS232/RS485
FSH03471 Black Mounting Base , To be mounted w/ TRS605
Z109PT2-1, RTD to mA/Volta converter with isolation
Flex Cable Breakout Board , 4 Pin/Conductor, 0.5 mm Pitch , FFC/FPC Connector to Thru-Hole / Pin Headers
IAC200 , Amplified Junction Box , 1-4 Channel , Nema 4 Rating , Material - Polyurethane , Analog Output , +/-5 VDC , +/-10 VDC , 0-20 mA , 4-20 mA , 0-16 mA , 5-25 mA
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 8/8. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 8/8. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
