QMA150 , Ch Fz: 100 N ; Ch Mz: 2.5 Nm , Custom Miniature Torque & Thrust Sensor , 0.472" [12 mm] H x 1.181" [30 mm] OD , Material - 2024-T4 Aluminum, 6 Cond. Spiral Teflon Cable , 3.94" Long, RoHS Compliant
PIMZOS In-line Cable Loadcell Converter, Output 4-20mA
Converter for AC/DC signals. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways.
EX9017 16 bit RS485 analog In I/O device with 8 analog In. Measures +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V in range ±20mA. Wide temperature range
DA converter with 2 Voltage or Current outputs with RS232/RS485
DA converter with 2 Voltage or Current outputs with Ethernet
LLB550 Load Button Load Cell , RoHS Compliant, Bottom #6-32 Tapped Holes , Material - 17-4 PH S.S. , 4 Pin Micro Receptacle
LLB500 Load Button Load Cell , RoHS Compliant, Bottom #6-32 Tapped Holes , Material - 17-4 PH S.S. , 4 Pin Micro Receptacle
QTA143 , 0.75 N-m , Miniature Low Capacity Through Hole Flange to Flange Reaction Torque Sensor , 14 mm ID x 10 mm H x 26 mm square , RoHS Compliant , 2024-T4, #30 Awg 6 Conductor Braided Shielded PVC Cable , 2 ft [0.6 m] Long
QTA141 , 1 N-m , Custom Micro Thru Hole Reaction Torque Sensor , RoHS Compliant , 10 mm ID x 22 mm OD x 10 mm H , Material - 2024-T4 , 34 Awg 4 Conductor Braided Cable , 6 in Long
TFF350, Reaction Torque Sensor, RoHS Compliant, Material - 2024-T4, 0.58" [14.7 mm] ID, 29 Awg 4 Conductor Spiral Teflon Cable, 6 in Long
Quido ETH 2/16 includes 2 digitl inputs, 16 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two stat
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 10/1. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Magnetic holder for use with the UltraShock and Shock300 data loggers.
APA300 , IPM650 Power Supply Kit with Interchangeable AC Plugs, 18 W, 15 VDC Output , 5 ft Long
ZCC995 , Analog Output/Relay/Alarm Cable Assembly for IPM650
ZCC994 , Sensor Panel Mount Cable Assembly , also Supports Sensors w/ TEDS Kits , for IPM650 w/ GOD02975 or FSH03585
