Collection

RFOT-O-Ring

One set of replacement O-rings for the RFOT.

Compare

€ 4,50

€ 3,97 Excl. tax

View

Bridge101A Data Logger

Loadcell / Wheatstone Bridge Data Logger. The Bridge101A supplies a 2.5V voltage excitation voltage and accepts signals from strain gauges, load cells and other low-level DC voltage sources.

Compare

€ 539,-

€ 475,94 Excl. tax

View

RHTemp1000IS Data Logger

FM Certified intrinsically safe, humidity and temperature data logger. Includes ISO17025 accredited calibration certificate

Compare

€ 449,-

€ 396,47 Excl. tax

View

RFOT Data Logger

The RFOT is a wireless meat temperature data logger. Includes ISO17025 accredited calibration certificate and micro USB cable

Compare

€ 539,-

€ 475,94 Excl. tax

View

RFTemp2000A

The RFTemp2000A is a wireless ambient temperature data logger. Includes ISO17025 accredited calibration certificate

Compare

€ 309,-

€ 272,85 Excl. tax

View

RFC1000-CE

Wireless transceiver for the RFOT, ThermAlert and RF2000A series

Compare

€ 199,-

€ 175,72 Excl. tax

View

DAQFactory Lite

DAQFactory Lite (no media, downloaded product). Small system.

Compare

€ 299,-

€ 263,12 Excl. tax

View

CryoTemp Data Logger

Cryotemp Ultra Low Temperature Data Logger. Records Temperatures as low as -86 ° C. Utilizes a USB docking station to communicate with a personal computer. (USB docking station sold separately).

Compare

€ 239,-

€ 211,04 Excl. tax

View

DAQFactory Base

DAQFactory Base (no media, downloaded product). Small power system plus. DAQFactory Lite with more I / O points and PID control

Compare

€ 599,-

€ 527,12 Excl. tax

View

PIMZOS HT96 Temperatuur Display met NTC Sensor

Low cost solution to measure temperatures from -50 ° C till + 99 ° C on display. NTC sensor (rubber encapsulted included) Power supply 230VAC / 50Hz. Equipped with 1 x Relay output for adjustable alarm!

Compare

€ 50,-

€ 38,- Excl. tax

View

Mux80

The Mux80 is an analog input expansion board That Increases the number of analog inputs for a possible Labjack unit. It can be connected to a U6 UE9 directly or through the DB37 connector. Ten of the Labjack's analog inputs are multiplexed (1: 8 each ...

Compare

€ 185,-

€ 162,80 Excl. tax

View

QuidoDuplex ETH

QuidoDuplex ETH is a set of two I/O modules for Ethernet (LAN, computer network) with a special firmware designed specificaly to transmit digital I/Os over Ethernet as an autonomous system.

Compare

€ 314,30 Excl. tax

View

Power cable IEC-320-C14 | IEC-320-C13

Mains Cable for use with IP Power, Male / Female, lenght 1.8m. Can be used with IP Power 9258 range to connect to your PC / Server

Compare

€ 1,98 Excl. tax

View

LJTick-Divider

Signal conditioning module designed to divide two single-ended channels or higher voltage analog signals down to 0-2.5 volt signals.

Compare

€ 35,-

€ 30,80 Excl. tax

View

FSH04801

Cable Assembly , 6 inch Long , 4 Position JST 04SR-3S Both Ends , 30 Awg Black Wires , Mates to QSH02312 & QSH02350 for Power & UART

Compare

€ 10,- Excl. tax

View

Isolator for Voltage AC/DC, mV to 1000V (TRMS)

Isolator for Voltage AC/DC, mV to 1000V (TRMS), Analog Output ±10V or 4-20mA

Compare

€ 159,- Excl. tax

View

TQS4 O wall holder, 90°

Wall holder 90° for TQS4 O. With this holder you can place the sensor further from the wall.
The sensor is not included in the delivery.

Compare

€ 10,80 Excl. tax

View

FSH04642

USB to UART Converter, Bus Powered, Type A Connector, 5 ft [1.5 m] Long , 7 Pin Nano Mating Connector , Anodized Aluminum Shell , 30 AWG 7 Conductor Cable with Polyurethane Jacket , RoHS

Compare

€ 598,- Excl. tax

View

LSB206 - Connector

LSB206 , S-Beam Jr.™ Fatigue Rated Tension and Compression Load Cell with UART Digital Output , M3x0.5-Thread , Overload Protection , Material - 17-4 PH S.S. , RoHS Compliant , 7 Pin Nano Receptacle

Compare

€ 1.398,- Excl. tax

View