Wall holder 90° for TQS4 O. With this holder you can place the sensor further from the wall.
The sensor is not included in the delivery.
Eight-way splitter of RS232 line. The data from the main line is transmitted without any change simultaneously to all eight lines. This allows for multiple devices to be connected to one RS232 line.
Papouch Pt100 sensor: -90 to +250 °C, metal rod
DA converter with 2 Voltage or Current outputs with Ethernet
Quido ETH 60/3 includes 60 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two sta
Quido ETH 2/32 includes 2 digitl inputs, 32 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two stat
Quido ETH 10/1 includes 10 digital inputs, 1 output and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two stat
Quido ETH 4/4 includes 4 digital inputs, 4 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two state
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Papago 2TH WIFI: 2x temperature, humidity and dew point with Wi-Fi.
Papago 2TH ETH: 2x temperature, humidity and dew point with Ethernet. Sensors not included!
USB to RS485 converter. Robust metal housing, galvanic isolation, small size, fixed communication parameters.
A device for measuring temperature and humidity at up to 32 locations
Universal software for the majority of standard Papouch devices. It enable signals Central Monitoring and failure or data from our thermometers, hygrometers, A / D converters, I / O modules, etc. It is ook bootable to communicate using the MODBUS protocol
Intelligent digital RS485 sensor for temperature and / or humidity measurement.
Power adapter that allows you to use USB port to power 5V device. Cable length: 1,8 m Jack connector 3.5 x 1.35 mm. Plus pole inside. Suitable example for TME, TH2E
Quido ETH 30/3 includes 30 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two sta
Quido ETH 2/16 includes 2 digitl inputs, 16 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two stat
Thermometer for Quido - Silicone. Length: depends on version Temperature ranges: -55 through +125 °C
Papouch store s.r.o. - Czech
