RS485 Modbus Transducer for strain gauges and loadcells
TCP2RTU_POE - MODBUS TCP naar RTU / ASCII-converter with PoE-power supply
Power supply unit 5V / 1,2A with EU plug, model PWR_ADP_5/1.2_3
Robust industrial and isolated USB to RS485, RS422 and RS422 multimaster (multidrop) converter with terminal connection. Allows you to simply install a virtual COM port on your Windows PC.
WiFi serial server with RS232 / RS485 port featuring Vout power output, that can power your external device and remotely turn it on and off. TCP, UDP and HTTP GET protocols. Easy configuration via responsive web interface.
Sensor for temperature and humidity with dew point calculation. Comunication via RS485 line. Plastic enclosure with vent holes for interiors. To be mounted on wall or ceiling.
Serial line converter with TTL levels to the Ethernet. Allows you to easily connect a device with a serial interface to the network. GNOME232 TTL comes unboxed and is Particularly Suitable for installation in bestaande facilities.
TCP2RTU is a transparent converter of the MODBUS TCP protocol running over Ethernet, into the MODBUS RTU protocol, running on RS232 lines.
TCP2RTU is a transparent converter of the MODBUS TCP protocol running over Ethernet, into the MODBUS RTU protocol, running on RS422 lines.
CQ485 is an RS485 and RS422 repeater, converter and isolator in one device. Both sides are galvanically isolated. Communication speed up to 921.6 kBd. Easy setup software included. Configuration via USB interface.
Universal software for the majority of standard Papouch devices. It enable signals Central Monitoring and failure or data from our thermometers, hygrometers, A / D converters, I / O modules, etc. It is ook bootable to communicate using the MODBUS protocol
TCP2RTU WiFi is a transparent both directions converter of the MODBUS TCP protocol, running over WiFi, into the MODBUS RTU/ASCII protocol, running over RS232, RS485 and RS422 lines.
DA converter with 2 Voltage or Current outputs with RS232/RS485
DA converter with 2 Voltage or Current outputs with Ethernet
Quido ETH 30/3 includes 30 digital inputs, 3 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two sta
Quido ETH 8/8 includes 8 digital inputs, 8 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two state
Quido ETH 4/4 includes 4 digital inputs, 4 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. Inputs are designed to connect voltage or contacts – can distinguish two state
Plastic operating tool (lever) for WAGO 236 Cage Clamp terminal
Wall holder 90° for TQS4 O. With this holder you can place the sensor further from the wall.
The sensor is not included in the delivery.
Papouch store s.r.o. - Czech
