Wiegand is a standard interface used in contactless card readers. Wie485 is bootable to convert the Wiegand interface to a format usable by a standard serial port (RS485).
TCP2RTU is a transparent converter of the MODBUS TCP protocol running over Ethernet, into the MODBUS RTU protocol, running on RS485 lines.
SNS-THE Temperature + Humidity Sensor
Intelligent Ethernet sensor for temperature, humidity and dew point
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 4/4. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
The SW485 is a 9 channel RS485 Splitter / Hub / Repeater and connects 9 channels in STAR topology
Quido ETH 0/2 includes 2 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface. The outputs are relays with a changeover contact. The thermometer can be connected to a cable of
Isolated Industrial USB to RS232 converter. Easy installation: A virtual COM port is created on your Windows PC. Ook easily usable in Linux OS.
TME Ethernet Thermometer with integrated web interface. Thermometer with Ethernet data transmission ASCII, HTTP (WEB), SMTP (e-mail), SNMP, MODBUS TCP, XML, etc
TDS thermometer can display temperature Measured by TQS3/4 thermometers
UC232 is a complete RS232 isolator or all signals. It Protects your PC, notebook or a different device against ground loops and over voltage.
Range -55 ° C to + 125° C. IP68 Sensor. A direct text output of the temperature value in ° C (ASCII) no conversion is needed. No external power supply is needed. Low price.
Inexpensive 10/100 Ethernet to RS232 converter. Suitable for extending RS232 line over Ethernet / INTERNET. Virtual serial port. Power supply ranging from: 4.5 up to 75V. Protocols: TCP / IP, UDP. Configuration via webinterface.
PAPAGO Meteo RS - Industrial weather station with RS485 ModBus
Thermometer for Pt100 or Pt1000 with two inputs and Ethernet interface with PoE, high precision 0.01 ° C temperature range from -200 to + 850 ° C (depending connected sensor).
TCP2RTU is a transparent converter of the MODBUS TCP protocol running over Ethernet, into the MODBUS RTU protocol, running on RS232 lines.
Sensor for temperature and humidity with dew point calculation. Comunication via RS485 line. Plastic enclosure with vent holes for interiors. To be mounted on wall or ceiling.
PAPAGO TH 2DI DO is used as an environment monior – it measures temperature, humidity and dew point. It also has 2 Digital Inputs and 1 Relay Output.
Range -55 ° C to + 80° C. A direct text output of the temperature value in ° C (ASCII) no conversion is needed. No external power supply is needed. Low price.
Power supply unit 5V / 1,2A with EU plug, model PWR_ADP_5/1.2_3
CQ485 is an RS485 and RS422 repeater, converter and isolator in one device. Both sides are galvanically isolated. Communication speed up to 921.6 kBd. Easy setup software included. Configuration via USB interface.
Papouch store s.r.o. - Czech
