Wall holder 90° for TQS4 O. With this holder you can place the sensor further from the wall.
The sensor is not included in the delivery.
Papago 5HDI DO WiFi - 5x Digital Input and 1 × Relay
DA converter with 2 Voltage or Current outputs with RS232/RS485
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 8/8. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 8/8. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Plexi cover for the Quido I/O module. Necessary posts and screws are included for mounting the cover to an electronics board. (The picture is for illustration only, the electronics board is not included.)
Metal box for Quido I/O module. The top and bottom of the box are included with suitable fasteners. (The pictures are for illustration only, neither electronics board nor DIN rail holder DIN is included.)
Plastic frame with DIN rail holder 35 mm (TS 35) for Quido electronics board 10/1. (The picture is for illustration only, neither the electronics board nor the plexiglass is included.)
Switching PSU 12V/0.5A, flying leads, EU power plug
Papago 2PT WIFI: 2x input for Pt100 / 1000 with WiFi
Serial line converter with TTL levels to the Ethernet. Allows you to easily connect a device with a serial interface to the network. GNOME232 TTL comes unboxed and is Particularly Suitable for installation in bestaande facilities.
Simple Ethernet to RS422 converter. It enable signals a device with RS422 to easily connect to the Ethernet, to extend the RS422 line via the Ethernet establishement or to a network via the Ethernet or RS422. Power supply 5 to 30V. Virtual serial por...
TDS thermometer can display temperature Measured by TQS3/4 thermometers
QuidoDuplex ETH is a set of two I/O modules for Ethernet (LAN, computer network) with a special firmware designed specificaly to transmit digital I/Os over Ethernet as an autonomous system.
QuidoDuplex RS is a set of two I/O modules for RS485 line (two wires only) with a special firmware designed specificaly to transmit digital I/Os over RS485 line as an autonomous system
TMU is a simple thermometer with a USB interface. The thermometer uses the USB interface for communication and usefull as a power source. It Measures temperatures from -55 ° C to +125 ° C.
AC-DC Ultra slim DIN rail power supply 12V/1.25A. With electronic protection against short circuit, overload and overvoltage. The possibility of fine-tuning the output voltage with a trimmer.
Papouch store s.r.o. - Czech
