The PRTemp140 is a submersible, pressure and high temperature data logger. Includes ISO17025 accredited calibration certificate
The WM-300 is a wall-mounting station that is built for use with the Cryo-Temp and LyoTemp. It can be mounted using the adhesive tape along the back or it can be screwed to a wall or any flat surface.
High Temperature Data Logger with Fast Response Probe
Magnetic Holder for use with the PR140, HiTemp140 Series and 1000 Series Data Loggers.
Papago 2TH ETH: 2x temperature, humidity and dew point with Ethernet. Sensors not included!
EX9530 USB to RS485 is an industrial converter for serial devices via USB. It supports handshake on the RS232 interface
EX9520A is an industrial-grade RS232 to RS422 / RS485 converter with an extended temperature range from -25°C to +75°C and isolation of 3000VDC on RS232
EX9520R is an industrial-grade RS232 to RS485 converter with an extended temperature range from -25°C to +75°C and isolation of 3000VDC on RS485
Robust industrial and isolated USB to RS485, RS422 and RS422 multimaster (multidrop) converter with terminal connection. Allows you to simply install a virtual COM port on your Windows PC.
Inexpensive 10/100 Ethernet to RS232 converter. Suitable for extending RS232 line over Ethernet / INTERNET. Virtual serial port. Power supply ranging from: 4.5 up to 75V. Protocols: TCP / IP, UDP. Configuration via webinterface.
TDS thermometer can display temperature Measured by TQS3/4 thermometers
Universal software for the majority of standard Papouch devices. It enable signals Central Monitoring and failure or data from our thermometers, hygrometers, A / D converters, I / O modules, etc. It is ook bootable to communicate using the MODBUS protocol
Weatherproof Enclosure for use with 101A Series Data Loggers.
The MicroTemp is a miniature, temperature data logger. Includes ISO17025 accredited calibration certificate.
USB interface cable package for Standard Series Data Loggers.
Interface cable package for the LyoTemp, TransiTemp and CryoTemp Series Data Loggers. Includes MadgeTech Software CD, Software Manual, Quick Start Guide, USB cable and USB Docking Station.
The Mux80 is an analog input expansion board That Increases the number of analog inputs for a possible Labjack unit. It can be connected to a U6 UE9 directly or through the DB37 connector. Ten of the Labjack's analog inputs are multiplexed (1: 8 each ...
Easy to use and inexpensive temperature probe. Features a plastic probe, a high-level linear output of 10 mV per degree K, a typical accuracy of ± 1 ° C (± 1.8 ° F) at room temperature, and a range of -40 to +100 ° C (-40 to +212 ° F).
The RB16 biedt a versatile method for electricians, engineers, and other Qualified Individuals, to interface a Labjack U12 with high voltages / currents. The included DB25 cable connects the RB16 to a Labjack U12. The RB16 HAS mounting sockets for you ...
USB-based multifunction data acquisition and control. A breakthrough price / performance ratio. This is the original Labjack from Labjack Corporation USA!
S401-L - ModBUS RTU indicator with OLED 2,7" display
ThermaLock thermowell for use with the HiTemp140-CF datalogger
